Advertisement
OPERATION OF CONTROLS
The hood is operated using the push button on the front panel.
The light switch turns the lamps on and off.
The blower switch turns the blower on to three speed settings:
0 - OFF
1 - LOW SPEED
2 - MEDIUM SPEED
3 - HIGH SPEED
4 – LIGHT
MAINTENANCE
GREASE FILTER
* The grease filters should be cleaned frequently (every two months of operation, or
more frequently for heavy use). Use a warm detergent solution.
* Grease filters are washable.
1.
Remove the grease filter one by one by pulling
out each latch. This will disengage the filter from
the hood. Tilt the filter downward and remove.
2.
Wash the filters, taking care not to bend them.
Allow them to be dry before refitting.
3.
When refitting the filters, make sure that the handle is visible from the outside.
4.
To install the grease filter, align rear filter tabs with slots in the hood. Pull out the
latch, push filter into position and release. Make sure the filter is securely
engaged after assembly.
NON-DUCTED RECIRCULATION CHARCOAL FILTER
This filter is not washable, can not be regenerated, and should be replaced
approximately every 3 months of operation, or more
frequently in the case of heavy usage.
1.
To install the charcoal filter, and lock it until the
stop click is heard.
2. Install grease filter after charcoal filter is
installed.
9
Advertisement
