Maintenance and Care, 5-6 Switching off the electricity Cleaning the filter after each cycle Empty the water container after each cycle Cleaning the condenser unit TCEL 87C Check the drum after each cycle Cleaning the dryer TCYL 87C Dryer description, 7...
Installation Where to put your dryer Electrical connections Place your dryer at a distance from gas Make sure of the following before you ● ranges, stoves, heaters, or cook tops insert the plug into the the electrical socket: because flames can damage the Make sure your hands are dry.
Warnings Check to see if the dryer is empty before ! The appliance has been designed and ● built according to international safety loading it. standards. The back of the dryer could ● These warnings are given for safety become very hot. Never touch it while in use.
Warnings To minimise the risk of fire in your or explosive substances. Highly flammable tumble dryer, the following should be substances commonly used in domestic observed: environments including cooking oil, Tumble dry items only if they have been acetone, denatured alcohol, kerosene, ●...
Maintenance and Care Switching off the electricity ! Failure to empty the water container may cause the following: ! Unplug your dryer when not using it, - The dryer will stop heating (so the load may still when cleaning it and during all be damp at the end of the drying cycle) (see The maintenance operations.
Maintenance and Care Water container Rear Filter Front Condenser unit Condenser unit Air intake Condenser cover Catches Check the drum after each cycle Quick Tips Remember to clean the door filter and Turn the drum manually in order to remove small items ●...
Dryer Description The features Water container Rating plate Model & Serial numbers Filter Condenser cover handle (Pull to open) Condenser cover Air intake grille Control panel Clean Filter TIMER DRYING LEVELS Light DRYING Knob Empty Water Clean Condenser PROGRAMMES Knob Light Light Indicator...
Start and Programmes Dryness Sensing Levels After selecting a programme that has a Sensor Dry option, turn the selection knob to the required dryness sensing level. If the sensing option is not available with your selected programme, the buzzer will beep three times. ! Some sensing programmes do not have all seven dryness level options available.
Start and Programmes Silk This is a programme for drying your delicate silk. ● It can be used for load sizes up to 0.5kg. ● This programme will take about 50 minutes, but may take longer depending on the size and density of the load ●...
Start and Programmes The Controls complete. The End light is on during this phase. Note: The Start/Pause light flashes Amber during this phase. PROGRAMMES knob ● Selecting this option enables both the pre and post care ! Warning, if after pressing the start button, the functions if appropriate.
Laundry Sorting your laundry Drying times Check symbols on clothing labels to make sure The table (see below) presents APPROXIMATE drying ● that the articles can be tumble dried. times in Minutes. Weights refer to dry garments. Sort laundry by fabric type. ●...
Troubleshooting One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the following troubleshooting suggestions: Problem: Possible causes / Solution: The tumble dryer won’t start. The plug is not plugged into the socket, or not making contact. ●...
● telephone number. ● the type of problem. ● the date of purchase. Hotpoint Service ● the appliance model (Mod.). ● the serial number (S/N). UK: 08448 224 224 ● This information can be found on the data label inside Republic of Ireland: 0818 313 413 the door of the machine.