Honeywell HD3U Quick Install Manual page 2

4
Operate Your Camera
Camera Functions
Joystick (5 way) control
Center
position
- Press down on the joystick in the center position and hold
= ENTER
two seconds to access the MAIN MENU.
- Press down again on the center position to select ENTER
and to enter a screen or to select a menu option.
! , " Move horizontally to and between menus and
options
# $
Move vertically to and between menus and options
,
".." indicates submenus
Local video out
connection
MENU
CAMERA SETUP ..
VIEWING ..
Select a menu, then
WDR PRESETS ..
press ENTER to enter DAY/NIGHT SETUP ..
VERSION INFO ..
the submenu.
RESTORE DEFAULTS <NO>
>
EXIT EXIT W/O SAVE.
To save your changes, select SAVE & EXIT, and then
ENTER. Your settings remain in effect when power is
turned off, then on again.
8
Set the Camera Image Properties
The VIEWING menu has the following controls:
VIEWING
• FLIP reverses the image horizontally on the
FLIP OFF
video monitor.
ID DISPLAY <OFF>
>
• ID DISPLAY opens the CAMERA ID SETUP
SHARPNESS NORMAL
BRIGHTNESS 110 80 130
screen where you can add a CAMERA ID
#
RESOLUTION NORMAL
(title) of up to 8 characters. You can also
COLOR ADJ. 0 -8 8
#
PREVIOUS PAGE . select the position of the CAMERA ID on the
video monitor.
• SHARPNESS and RESOLUTION affects the
sharpness of the image.
• BRIGHTNESS adjusts the brightness of the
image.
• COLOR adjusts the color saturation.
5
Select the WDR Preset For Your Scene
CAMERA SETUP ..
VIEWING ..
WDR PRESETS .. INDOOR>
>
DAY/NIGHT SETUP ..
VERSION ..
RESTORE DEFAULTS
EXIT
The Wide Dynamic (WDR) presets and the scenes for which they are optimized.
WDR Preset
INDOOR
LOADING DOCK
GAMING
LICENSE PLATE
OUTDOOR
ATM
LOBBY
Move the joystick !
or "
to change the status.
9
Install the Enclosure Cover
To install the dome cover, align the dome cover with the camera base and push until
it securely snaps into place.
© 2009 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The
information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use
thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
WDR PRESETS
MENU
WDR PRESETS
INDOOR
LOADING DOCK
PRESETS .. <CUSTOM.>
>
FLUORESCENT OFF GAMING
PREVIOUS PAGE
LICENSE PLATE
OUTDOOR
ATM
SAVE & EXIT
LOBBY
Area of Interest WDR Exposure
Full scene Wide Highlights
Center scene Ultrawide Highlights
Full scene spot glare Medium Highlights
Full scene spot glare Medium Shadows
Full scene Ultrawide Highlights
Center scene Ultrawide Shadows
Center scene Wide Shadows
Camera base
Dome cover
6
Set the Day/Night Function
Note This setting is dependent on the
MENU
AGC setting.
CAMERA SETUP ..
VIEWING ..
On the DAY/NIGHT SETUP menu, select:
WDR PRESETS .. INDOOR>
• DAY/NIGHT SETUP, then select either:
DAY/NIGHT SETUP ..
>
VERSION ..
• AUTO (default) depending on light level, the
RESTORE DEFAULTS
camera automatically switches from color to
EXIT SAVE & EXIT
black and white, OR
• OFF the camera stays color mode
regardless of light level, OR
• B/W the camera stays in black and white
mode regardless of light level
• *CLR BURST (color burst), then select either:
• ON (default) = B/W with color burst, OR
• OFF = B/W without color burst
Note Certain video recorders require color carrier/burst to operate.
7
Set the AGC
The Automatic Gain Control is set by the chosen WDR preset. You can refine the
AGC setting in the AGC menu (MAIN MENU
This setting affects the day/night threshold. A higher AGC value results in the
camera switching from day to night mode at lower light levels. Adjust the level of
gain applied to the video signal in low light conditions.
Honeywell Systems Group (Head Office) Honeywell Systems Group Northern Europe
2700 Blankenbaker Pkwy, Suite 150 Ampèrestraat 41
Louisville, KY 40299, USA 1446 TR Purmerend, The Netherlands
www.honeywellvideo.com www.honeywell.com/security/nl
℡ +1.800.796.2288 ℡ +31.299.410.200
Honeywell Systems Group Europe/South Africa Honeywell Systems Group Deutschland
Aston Fields Road, Whitehouse Industrial Estate Johannes-Mauthe-Straße 14
Runcorn, Cheshire, WA7 3DL, UK D-72458 Albstadt, Germany
www.honeywell.com/security/uk www.honeywell.com/security/de
℡ +44 01928.754028 ℡ +49.74 31.8 01.0
Honeywell Systems Group Caribbean/Latin America Honeywell Systems Group France
9315 NW 112th Avenue Immeuble Lavoisier
Miami, FL 33178, USA Parc de Haute Technologie
www.honeywellvideo.com 3-7 rue Georges Besse
℡ +1.305.805.8188 92160 Antony, France
www.honeywell.com/security/fr
Honeywell Systems Group Pacific ℡ +33.(0).1.40.96.20.50
Level 3, 2 Richardson Place
North Ryde, NSW 2113, Australia Honeywell Systems Group Italia SpA
www.honeywellsecurity.com/au Via della Resistenza 53/59
℡ +31.2.9353.7000 20090 Buccinasco
Milan, Italy
Honeywell Systems Group Asia www.honeywell.com/security/it
35F Tower A, City Center, 100 Zun Yi Road ℡ +39.02.4888.051
Shanghai 200051, China
www.asia.security.honeywell.com Honeywell Systems Group España
a
℡ +86 21.5257.4568 Mijancas 1. 3
P. Ind. Las Mercedes
Honeywell Systems Group Middle East/North Africa 28022 Madrid, Spain
Post Office Box 18530 www.security.honeywell.com/es
LOB Building 08, Office 199 ℡ +34.902.667.800
Jebel Ali, Dubai, United Arab Emirates
www.honeywell.com/security/me
℡ +971.04.881.5506
+1.800.796.CCTV (North America only)
Document 800-05023 – Rev A – 11/09
CAMERA SETUP AGC).
Planta
www.honeywellvideo.com
HVSsupport@honeywell.com