Nordic ID RF651 User Manual page 24

���������������
For more information about Nordic ID PortRouter software see the "Nordic ID PortRouter manual".
4. Install the RF6xx Demonstration Applications
In this step four different demo applications are installed to your computer.
• Click "Install RF6xx Demo Software" and follow the instructions of the RF6xx Demo software installation program.
5. Connecting the PortRouter to the "Fast Inventory" Demonstration Application
Follow these instructions to connect PortRouter to the "Fast Inventory" demo.
First run PortRouter from:
<Start>-<Programs>-<NordicID>-<NordicIDPortRouter>-<PortRouter>
• Click right mouse button over PortRouter window and select Load.
• Browse to /Program files/NordicID/NIDPortRouter folder and open file "RF650DemoFI.cfg".
• Connect all entries by answering yes to the pop-up window question.
• Two connections appear on the connection list.
Then run the FastInventory program from
<Start>-<Programs>-<NordicID>-<RF6xxDemoPack>-<FastInventory>
• In the FastInventory program, type "2000" into the "Port:" edit field, and press "StartServer" button. Green text:
"Clients: 1" should now appear in to the FastInventory screen.
• If firewall is enabled, a security alert window appears. Press the "Unlock" button in order to allow the TCP/IP connection
between the Port Router and the FastInventory.
• Do not close the FastInventory or the PortRouter application. You can hide those to the system tray by pressing the
"Hide window" button.
6. Connecting RF651 to the PortRouter
Activate the PortRouter window if not already active.
• Go to "Connections" page on PortRouter
• 2 connections appear on the connection list.
• Select "RF650" connection and use right mouse click to select "Modify".
• Change the Bluetooth address to the same as your RF650 Bluetooth address.
• Save the address by pressing "OK" -button.
• Insert batteries into the RF650 if not already done.
• Activating RF650 first time, the "* Settings *" menu appears in the display. You can go to settings also by pressing
SHIFT+0 and selecting settings.
• Select "Wait Connection" with arrow keys and press "OK"
• Wait until "Connected" status message appears on the RF650 screen. This may between 3 and 20 seconds.
• The "Connected" message will disappear in few seconds
• Press OK or any F-key to start communication with the "Fast Inventory" program.
© 2006 Nordic ID oy
RF651 User Manual Version 1 June 2006
19