Panasonic Diga DMR-EX77 Operating Instructions Manual page 71

Analogue Manual Tuning
You can delete analogue channels and set the analogue channel
details.
After performing steps 1–4 (➡ 69)
5
Press [3, 4] to select "Settings for
Analogue Services " and press [OK].
6
Press [3, 4] to select "Manual
Tuning" and press [OK].
Manual Tuning
Pos Name Ch Pos Name
901 ARD 4 911
902 ZDF 2 912
903 N3 5 913
904 HR3 8 914
905 BR3 10 915
906 916
907 917
SELECT
908 918
OK
RETURN 909 919
910
920
Delete
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Red" button.
∫ To change the tuning settings for individual
programme position
7
Press [3, 4, 2, 1]
to select a
programme position
and press [OK].
Press [3, 4] to select an item and press [1].
Ch
[For]Germany[
Pos 901
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Video System
Auto
Off
Mono
SELECT
Title Page 301
RETURN
RETURN : leave
[For]France,[Italy[and[Spain[
Pos 901
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Video System Auto
Audio Mode
BG
SELECT
Mono
Off
Title Page 301
RETURN
RETURN : leave
Pos Programme position in the table
(You cannot change the programme position.)
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between "Z" and "¢".
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning
condition and press [OK].
≥Press [1] to return to "Auto".
Video System To select the video system type
Press [3, 4] to select "PAL" or "SECAM" if the
picture lacks colour, and press [OK].
Auto: This unit automatically distinguishes
PAL and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
Audio Mode To select the audio reception type
[For]France,] If sound quality is poor, press [3, 4] to select
[Italy[and]Spain[
"BG" or "L" and press [OK].
BG: PAL B.G.H/SECAM B.G
L: SECAM L, L'
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound
is distorted due to inferior reception conditions,
or if you want to record the normal (mono)
sound during a stereo, bilingual or NICAM
broadcast, and press [OK].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [OK].
≥To find the correct title page for the station,
refer to its Teletext TV guide.
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step 6.
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
RQT8860
71