Panasonic Diga DMR-EX77 Operating Instructions Manual page 17

Connecting with an HDMI (High Definition Multimedia Interface) terminal
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital
video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to
1080p, 1080i or 720p HD video.
≥Please use the HDMI cables 5.0 meters or less.
Regarding VIERA Link "HDAVI Control
When connecting with a Panasonic TV (VIERA) or a receiver equipped with the "HDAVI Control" function, linked operations would be
possible. [➡ 18, Linked operations with the TV (VIERA Link "HDAVI Control
≥Non-HDMI-compliant cables cannot be utilized.
≥It is recommended that you use Panasonic's HDMI cable.
Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
Connecting with an HDMI compatible television
Connecting with a Panasonic TV (VIERA)
If the 21-pin Scart cable is connected, the following
functions are available.
≥Direct TV Recording (➡ 18)
≥Watching pictures from digital satellite receiver or
analogue decoder
(In this case, make sure to switch the
television input to "AV".)
[Required\setting]
≥Set "VIERA Link" to "On" (➡ 67).
(The default setting is "On".)
≥Set "Digital Audio Output" to "HDMI and Optical"
(➡ 67).
(The default setting is "HDMI and Optical".)
[Note]
≥[EX87] If connecting to a TV incompatible with CPPM (Content Protection for Prerecorded Media) (➡ 84), copy-protected DVD-Audio cannot be
output through the HDMI terminal. Connect the audio cables (red, white) or the 21-pin Scart cable
≥If you are connecting to a TV that is only compatible with 2 channel output, audio with 3 channels or more will be down mixed (➡ 84) and output
as 2 channels. (Some discs cannot be down mixed.)
≥You cannot connect this unit to DVI devices that are incompatible with HDCP.
For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
§1
Information about the Decoder is for France, Italy and Spain only.
§2
Only when this unit is connected to a Panasonic TV (VIERA)
Connecting with an HDMI compatible television and receiver
Connecting with a Panasonic TV (VIERA)
➡ above
[Required]setting] ➡ above
[Note]
≥[EX87] If connecting to a receiver incompatible with CPPM (Content Protection for Prerecorded Media) (➡ 84), copy-protected DVD-Audio cannot
be output through the HDMI terminal. Connect to the receiver with an optical digital cable or audio cables (red, white).
TM " function
TM "/Q Link)]
Fully wired
21-pin Scart cable
RF RF
Y
IN IN
P B
P
RF RF R
OPTICAL
OUT OUT
DIGI DIGITAL AL AUDIO OU UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT
Television's rear panel
Fully wired
21-pin Scart cable
RF RF
Y
IN IN
P B
P R
RF RF OPTICAL
OUT OUT
DIGI DIGITAL AL AUDIO OU UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT
AV
HDMI IN
HDMI AV OUT
AV1
( TV )
R-AUDIO-L VIDEO S VIDEO
AV2 ( EXT )
21-pin Scart cable
AV
Digital satellite receiver or analogue
§1
decoder's rear panel
§2
to the corresponding terminals.
AV
HDMI IN
HDMI IN
Receiver's rear
panel
HDMI AV OUT
AV1
( TV )
R-AUDIO-L VIDEO S VIDEO
AV2 ( EXT )
Television's
rear panel
HDMI cable
A A V OU V OUT T
This unit's rear panel
HDMI cable
HDMI OUT
HDMI cable
A A V OU V OUT T
This unit's rear panel
RQT8860
17