To Cancel Recording When Recording Has Already Begun; To Release The Unit From Recording Standby; Notes On Timer Recording - Panasonic Diga DMR-EX77 Operating Instructions Manual

4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
12:56:00 15. 7. TUE
HDD
Drive
Stop Mode space
DVD
20:00 HDD SP
0 OK
P
12:56:00 15. 7. TUE
HDD
Drive
Stop Mode space
DVD STTL
20:00 HDD SP OFF
0 OK
P
Repeat steps 2–4 to programme other recordings.
Press [Í DVD] to turn the unit off.
∫ To cancel recording when recording has already
begun (➡ right)

∫ To release the unit from recording standby

(➡ right)
∫ Notes on timer recording (➡ right)
No. Name
&
01
ARD
[For]Germany[
Check to make sure "OK"
is displayed (➡ 32).
[For]France[Italy[Spain[
Check to make sure "OK"
is displayed (➡ 32).
To cancel recording when recording
has already begun
1
While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
Stop Recording
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
Cancel
Stop Recording
SELECT
RETURN
OK
2
Press [2, 1] to select "Stop
Recording" and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
To release the unit from recording
standby
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the "Red" button.
≥The timer icon "F" (➡ 32) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon "F" (➡ 32) remains in the timer
recording list.
≥Press the "Red" button again to activate timer recording
standby.

Notes on timer recording

≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (➡ 51).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
the "F" flashes on the unit's display.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Programme
Programme
Recorded Recorded
Not recorded
RQT8860
31