Panasonic Diga DMR-EX77 Operating Instructions Manual page 16

STEP 1 Connection
Other connections
§
Leave "Yellow" unconnected.
Connecting a television with AUDIO/VIDEO or
S VIDEO terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Television's rear panel
AUDIO IN VIDEO S VIDEO
R L IN IN
Red White Yellow
Audio/Video cable
(included)
Red White Yellow
R-AUDIO-L VIDEO S VIDEO
This unit's rear panel
Connecting a television with COMPONENT VIDEO terminals
Component Video
cable
RF RF
Y
IN IN
P
B
P
RF RF OPTICAL R
OUT OUT
DIGITAL AL AUDIO OU DIGI UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT
Connecting an amplifier or system component
∫ Connecting an amplifier with a digital input terminal
≥To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with Dolby Digital, DTS and MPEG decoders.
[Required]setting]
"Digital Audio Output" in the Setup menu (➡ 66)
≥When this unit is connected to an amplifier with an Optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
"Digital Audio Output" to "Optical Only" in the Setup menu (➡ 67).
In this case audio is only output from the amplifier not the
television.
≥Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
≥[EX87] Even if using this connection, output will be only 2 channels
when playing DVD-Audio.
Amplifier's rear panel
Optical digital audio cable
Do not bend sharply when
connecting.
RQT8860
This unit's rear panel
16
Television's rear panel
AUDIO IN VIDEO S VIDEO
IN
R L IN
Red White
S Video
§
cable
§
Red White
AV O
R-AUDIO-L VIDEO S VIDEO
This unit's rear panel
Television's rear panel
AUDIO IN
Y
COMPONENT R L
VIDEO IN
P
B
Red White
P
R
§
Audio/Video
cable
§
(included)
Red White
AV1
( TV )
R-AUDIO-L VIDEO
AV2 ( EXT )
This unit's rear panel
OPTICAL IN
Insert fully, with
this side facing
up.
Y
P
B
P
OPTICAL R
UT
COMPONENT COMPONENT
DIGITAL AL AUDIO OU DIGI UDIO OUT
VIDEO OUT VIDEO OUT
(PCM/BITSTREAM) (PCM/BITSTREAM) AV2 ( EXT )
Connecting a VCR with AUDIO/VIDEO or
S VIDEO terminals
The S VIDEO terminal achieves a more vivid picture than the VIDEO
terminal. (Actual results depend on the television.)
This unit's front panel
Yellow White Red
Red White Yellow
R L
AUDIO OUT
AV O
VCR's rear panel
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡ 85) and provide a purer picture than the S
VIDEO OUT terminal.
≥Connect to terminals of the same colour.
If you have a regular television (CRT: cathode ray tube)
Use component output with progressive "Off" (The default setting
➡ 67), even if it is progressive compatible, because progressive
output can cause some flickering. This is the same for multi system
televisions using PAL mode.
COMPONENT VIDEO OUT
This unit
S VIDEO
For progressive output (➡ 21)
∫ Connecting a stereo amplifier
Amplifier's rear panel
AUDIO IN
R
Red White
Red White
AV1
( TV )
R-AUDIO-L
This unit's front panel
White Red
§
Audio/Video cable
(included)
Red White
R
VIDEO S VIDEO
AUDIO OUT
OUT OUT
VCR's rear panel
CRT
DO NOT
Progressive output
L
Audio cable
This unit's rear panel
VIDEO S VIDEO
S Video
cable
§
L
VIDEO S VIDEO
OUT OUT
COMPONENT
VIDEO IN