When Replacing The Main P.c.b; Service Position - Panasonic Lumix DMC-FT4EB Service Manual

8.2.

When Replacing the Main P.C.B.

After replacing the Main P.C.B., be sure to achieve adjustment.
The Maintenance software (DIAS) is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-
site in "TSN system".
8.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 RFKZ0549
8.3.1. Extension Cable Connections
CAUTION-1. (When servicing Flash CON P.C.B.)
1. Be sure to discharge the capacitor on Flash CON P.C.B.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH CON P.C.B.".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on Flash CON P.C.B.
3. DO NOT allow other parts to touch the high voltage circuit on Flash CON P.C.B.
Table S1 Extension Cable List
Connection
FP9006 (Main P.C.B.) - FP8001 (Flash CON P.C.B.)
37
Form
18PIN 0.5 FFC