Hidden Bake Element; Rpsm Aux Board - GE Profile PB920TPWW Technical Service Manual

RPSM Aux Board

To remove the RPSM Aux board:
1. Remove the rear cover. (See
2. Mark and disconnect the control board wiring
and wire harnesses.
3. Remove the four 1/4-in. hex-head screws that
attach the board to the oven.
Screw
Screw
Before disassembling the range to access the
hidden bake element, check the resistance of
.)
Rear Cover Removal
the element by disconnecting the plug and
checking between the orange and yellow wires.
The resistance reading of a good element is
approximately 21.7Ω.
If the hidden bake element does need to be
changed, the procedure is the same as for the
previous version of the oven.
Screw
Screw
– 18 –

Hidden Bake Element

21.7Ω
Ω
COM
/Ω
V