Minelab GPX-4000 Quick Start Manual page 10

14 Assembly
Fitting the Battery Harness:
1 Thread your arms through the harness,
so the battery pack sits on your back.
2 Clip the waist and chest buckles together.
Adjusting the Detector for Comfortable
Detecting, pg. 16.
Attaching the Bungy Cord:
1 Create a loop in the bungy cord.
2 Undo the plastic wing-nut and remove
the bolt from the clamp.
3 Push the bolt back through the clamp and
loop to secure the bungy cord to the shaft.
4 Fasten the screw with the wing-nut.
5 Clip the bungy cord onto one of the harness
shoulder strap rings.
Adjusting the Detector for Comfortable
Detecting, pg. 16.
15