Important Safety Information; Sensitive Electronic Equipment; Charging The Battery; Safety Precautions - NEC M155 User Manual

Dect messenger
Table of Contents

Advertisement

Important safety information

Important safety information
Only use this product in countries where the relevant authorities have
authorised its operation.

Sensitive Electronic Equipment

Any radio-based equipment can potentially cause interference with
other equipment and can be interfered from other equipment. This also
applies for DECT equipment. However, due to the very low
transmission power level, interferences are unlikely. Research proves
that operational DECT devices normally don't influence electronic
equipment. However some precautions must be taken into account for
sensitive electronic equipment e.g. sensitive laboratory equipment.
When DECT devices operate in very close range to sensitive electronic
equipment, incidental influence can appear. You are advised not to
place the DECT device on or close (less then 10 cm) to this kind of
equipment, even in stand-by mode.

Charging the battery

This product uses a rechargeable (non-replaceble) Li-Polymer battery
(3.7V, 400mAh).
Charge the battery of the M155 only in combination with the M155
Desktop Charger and the attached Ktec KSLFB0500035W1UV-1
adapter that comes with the product.
Do not charge the battery by any other means.
The AC/DC adapter comes with 4 changeble mains plugs. Select the
appropriate mains plug for your country.
Plug the AC/DC adaptor in a wall outlet socket near the equipment for
easy access/removal of the AC/DC adaptor.

Safety precautions

Please observe the following notes on safety when setting up,
connecting and using the handset:
Do not open the M155 or the charger; this could expose you to high
voltages. Have all repairs carried out by authorized service
personnel.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents