Replying With A Voice Call To A Stored Incoming Message - NEC M155 User Manual

Messaging
[

Replying with a voice call to a stored incoming message

To set up a voice call to the call back number indicated in a stored
message, perform the following steps:
38
4. Repeatedly press the Upper key for a short
time until the display shows:
5. Press the Lower key for a short time.
6. Repeatedly press the Upper key for a short
time until the display shows: the required
message stored in the
7. Press the Lower key for a short time.
8. Press the Lower key for a short time.
9. Repeatedly press the Upper key for a short
time until the display shows: the message
you want to send.
10. Press the Lower key for a short time.
The message is displayed. If so required use
]
(repeatedly) pressing the Upper key for a
short time to scroll through the message.
11. Press the Lower key for a short time.
12. While sending the message the display
shows Sending.
13. When the message is successfully sent
sent is displayed.
The M155 returns to the idle mode.
Inbox
Inbox of the M155.
Msg.