LIFESTYLER Bazoongi User Manual page 17

4. Lay the Frame Pad (11) on the frame. Adjust the
position of the Frame Pad so the notches are
aligned with the Legs (7,8) as shown. Be sure
4 Enclosure Frame Opening are fit to the
Enclosure Socket position.
Do not use the trampoline without the Frame
Pad (11), which is designed to reduce the likeli-
hood of injury to the user from coming in con-
tact with the trampoline frame. If you do not
have a Frame Pad, contact your dealer to
obtain one. Properly install the Frame Pad
before using the trampoline.
5. Look under the trampoline and locate the pairs
of straps near the edge of bed(8) and Double
D-ring and webbing near the frame.
See the inset drawing. A, B and C. Repeat this
step with the remaining straps (not shown).
Thread one end of Elastic Tie-Down, then tie a knot
on V-Ring.
Repeat this step with the remaining straps which at
middle position of each pad section (not shown).
4
7
A
Frame Pad
D-ring
Top tube
Webbing
Elastic Tie-Down
V-Ring
Spring
17
Enclosure Frame Opening
8
Notches
11
B C
Frame Pad
D-ring
Top tube
Webbing
Elastic Tie-Down
V-Ring
Strap with Double D-ring on the pad edge
11
Frame Pad
D-ring
Top tube
Webbing