iLuv is a trademark of jWIN Electronics Corp. iPod is a trademark of Apple Inc. registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.
All logos and brands are property of their respective owners. iPod not included in this package. Features and specifications are subject to change without
be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including
photocopying, recording or use of an information storage and retrieval system. Any unauthorized distribution or reproduction of this printed material or
product, or any portion thereof, will be prosecuted to the fullest possible extent of the law.
INTRODUCTION Thank you for purchasing iMM9400/9500. Unpack the unit and make sure all the accessories are put aside so they will not be lost. We recommend that you retain the original carton and packaging materials for future use, should you transport or ship the unit in the future.
This encoding format was developed to reduce the amount of data (or audio information) required to represent audio, yet to still reproduce audio as same as the original uncompressed audio for most listeners. iMM9400/9500 | V10M10_IM_EN_060509 1. Disc Size: 12cm / 8cm 2. Disc Type: CD 1.
GETTING STARTED CAUTION This product may be used only with iLuv iMM9400/9500 stand. Use with other stands may result in instability causing possible injury. Main Unit Assembly and Disassembly Speaker Assembly and Disassembly 5 | iLuv GETTING STARTED Wall-mounting Installation...
14. VOLUME + / - 7. SELECT 15. AM/FM 8. NEXT ( 16. MODE 7 | iLuv iMM9400/9500 | V10M10_IM_EN_060509 GETTING STARTED Location of Controls (Front View of Main Unit) - continued AUX IN PHONES 17. iPod Dock Cover 23. SD Slot 18.
AC outlet. Once the unit is plugged in, its time display will start flashing. Refer to “Setting the clock” on P. 13, to set the current time iMM9400/9500 | V10M10_IM_EN_060509 (Cable and subwoofer Subwoofer included with...
3. Install or replace the button-type battery “CR2032” (supplied). 4. Close the battery tray. Warning: Incorrect placement of the battery may cause malfunction of the iMM9400/9500 | V10M10_IM_EN_060509 remote control and/or personal injury to the user. Replace only with or equivalent batteries.
Setting the time using the Time Sync function The easiest way to set the clock on the iMM9400/9500 is to synchronize it with the atomic clock function on your iPhone or iPod. This unit is equipped with a Time Sync function which automatically sets the time by synchronizing it with your iPhone or iPod, when it is placed in the dock.
Installing the dock adapter Before docking your iPhone or iPod on iMM9400/9500, a dock adapter must be properly installed. Please make sure you are using a correct dock adapter for your iPhone or iPod and that it is properly inserted into the universal adapter of iMM9400/9500.
2. To remove the CD, hold it by the edges and lightly press on the holder to remove it. 3. Then close the disc compartment by pressing OPEN/CLOSE. After closing the disc cover, the CD system immediately begins to scan the content of the compact disc. iMM9400/9500 | V10M10_IM_EN_060509 iLuv | 18...
1. Load the CDs. 2. Press TIMER/MEMORY in the stop mode to switch to programming mode. “MEMORY” will blink on the display. iMM9400/9500 | V10M10_IM_EN_060509 ALL” will display. . The CD will continue to play iLuv | 20...
1. When an MP3 disc is playing, MP3 INFO repeatedly. The track no., title and artist information will be shown in the display if disc information is available. 2. To resume normal play display, press MP3 INFO repeatedly until playing time reappears. iMM9400/9500 | V10M10_IM_EN_060509 iLuv | 22...
Never use abrasive cloths or polishes as these will damage the finish of your unit. Caution: Never allow any water or other liquids to get inside the unit while cleaning. iMM9400/9500 | V10M10_IM_EN_060509 iLuv | 24...
17. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. iMM9400/9500 | V10M10_IM_EN_060509 iLuv | 26...
Page 15
Note: Do not make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. iMM9400/9500 | V10M10_IM_EN_060509 iLuv | 28...
Page 16
• Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected, the apparatus from supply mains, the mains plug of the apparatus shall be disconnected from the mains socket outlet completely. iMM9400/9500 | V10M10_IM_EN_060509 iLuv | 30...
31 | iLuv SPECIFICATIONS • GENERAL 1. Power requirement a. Main unit: i. AC: 120V 60Hz (iMM9400) 110V / 220V, 60Hz/50Hz (iMM9400D) 230V, 50Hz (Europe only) ii. DC: 1 x CR2032 for Remote Control b. Subwoofer: AC 100-240V, 50/60Hz (only for iMM9500) 2.
Need help?
Do you have a question about the IMM9400 and is the answer not in the manual?
Questions and answers