Sms; Creating A Message - Huawei E220 HDSPA User Manual

Creating a Message

Click or select Tools > SMS, the SMS interface is displayed.
St ep
1 Click Write and the Write interface is displayed.
2 Enter the phone number by one of the following ways:
Enter the phone number: In the Contacts field, enter the phone number a
use t
Sele t the contact: Click Contacts. Select one or more conta
OK. I
Note:
3 Write th
Note:
4 Click Sen
to the Outbox. If the sending fails, a prompt is display
send it again. If you cancel the sending, the message is au
Outbox.
Click Save to save the message to the Draft.
Click Clear to clear the phone number and the message.
he semicolon to separate phone numbers.
c
n the pop-up dialog box, select the phone numbers and
You can enter a phone number or select a contact.
To select several contacts, press and hold the Shift key or the Ctrl
key.
To select several contacts, select the Apply to all items check box
to simplify the procedures.
e message.
On the upper right corner of the interface, the number of remaining
characters and the number of the message is split are displayed.
d to send the message. After the message is sent, it is auto saved
Procedure
16
9

SMS

cts and click
click OK.
ed asking whether to
to saved to the
nd