3.1 Packet Data Service
The E392 supports the PS domain data service based on LTE/HSPA+/UMTS
/EDGE/GPRS
After you connect the E392 to a PC with the USB interface, the E392 driver and the
client software are installed on the PC automatically. Dual APN is supported in LTE
mode. A default APN will be used at initial attach to LTE. The other APN is use like
normal APN in 2G/3G. You can configure APN through the E392 application (or
directly use the default settings) and set up a network connection. Then you can send
or receive E-mail, access the network through wireless connection, and download
files through wireless data channels.
To use the data service, perform the following steps:
1.
2.
3.2 SMS
The E392 supports message writing/sending/receiving and group sending on
GSM/EGDE/UMTS network. As long as SMS over SGs is not activated for LTE, so no
messages can be sent/or received on LTE, and the messages can only be stored. You
can manage messages through the dashboard, such as sorting the messages by
telephone number or time.
Issue 01 (2011-5-03)
3
Enter *99# or *98# to launch the packet data service.
In the Choose Connection Type dropdown box, choose a network type.
Commercial in Confidence
HUAWEI E392 LTE USB Stick V100R001
Services and Applications
Product Description
Page 12 of 21