Download  Print this page

Whirlpool W10596019A Use & Care Manual page 9

Electronic dryer
Hide thumbs

Advertisement

Cycle Guide – Manual Cycles
Settings and options shown in bold are default settings for that cycle.
If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to
the default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the time
appears in the display. Use + and – to increase
or decrease the time in 1-minute increments.
Touch and hold to change the time in 5-minute
increments.
The maximum dry time is 100 minutes.
Items to dry:
Cycle:
Small loads and
Quick Dry
sportswear
Any load
Timed Dry
NOTE: Select Air
Only to dry foam,
rubber, plastic,
or heat-sensitive
fabrics.
On some models, you may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium
Drying Temperature settings.
Cycle Guide – Steam Cycle
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Items to
refresh:
Cycle:
Shirts, blouses, and
Steam
slacks
Refresh
You may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
* On steam models only.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more
than 1/4 full.
Drying
Default
Temperature:
Time:
High
26
Medium
Low
Extra Low
Air Only
High
40
Medium
Low
Extra Low
Air Only
(steam models only)
Drying
Default
Temperature:
Time:
High
22
Medium
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Available
Options:
Wrinkle Shield
For small loads of 3–4 items.
™†
Wrinkle Shield
™†
Use to dry items to a damp level for items that do
not require an entire drying cycle. Select a drying
temperature based on the type of fabrics in your
load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the
higher setting.
Available
Options:
Wrinkle Shield
Use to reduce odors and light wrinkles.
™†
Static Reduce*
Do not add dryer sheets.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not pack tightly. Items need to tumble freely.
Cycle Details:
Cycle Details:
9

Hide quick links:

Advertisement

loading