Kyocera ECOSYS P6030cdn Operation Manual page 150

>>POP3
? Off
>>RAW Port
? On
>>LPD
? On
6-54
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
POP3 (POP3 setting)
Select whether or not to receive email using POP3.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>POP3 appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
RAW Port (RAW Port setting)
Select whether or not to communicate using RAW Port.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>RAW Port appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
LPD (LPD setting)
Select whether or not to receive documents using LPD as the network
protocol.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>LPD appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
HTTP (HTTP setting)
Select whether or not to communicate using HTTP.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>HTTP appears.
Using the Operation Panel