Automatic Channel Preselection; Selecting The Satellite To Be Used - Radix epsilon Instruction Manual

Setting Up and Programming the Digital Receiver
7.5

Automatic Channel Preselection

7.5.1

Selecting the Satellite to be Used

Page 20
The displayed data concerns the revision of the decoder firmware current at the
time the receiver was manufactured, which might be of value if the receiver should
ever require servicing.
•
Press the EXIT-key to exit the "Decoder Status" menu.
NOTE:
Four satellites have been factory preprogrammed. Contact your dealer or a
television repair shop specializing in satellite-television systems if you would like to
have further satellites programmed.
•
Use the p and q keys to highlight the "Installation" field.
•
Press the MENU-key.
Installation
Satellit
DiSEqC/22KHz
LNB Lokal-Freq
Satellit ASTRA
LNB Lokal 10600MHz
•
Use the p and q keys to highlight the "Satellite" field.
•
Press the MENU-key and then use the p and q keys to select one of the
following satellites: ASTRA/EUTELSAT 13°/ASIASAT2/PANAMASAT2.
Installation
Satellite
DiSEqC/22KHz
LNB Lokal-Freq
ASIASAT2
•
Press the MENU-key to confirm your choice.
You may now preselect the desired channels for the particular
satellite that you have selected.
Signal Stärke
Autom. Suchlauf
Manueller Suchlauf
Einstellungen
DiSEqC AUS
22KHz EIN
MENU/EXIT
Signal Strength
Auto Search
Manual Dearch
Setup Value
MENU/EXIT
1 - 3
1 - 3 - 1
Version 1.0