Table of Contents
Advertisement
SAFETY SYMBOLS
Safety symbols and special annunciators on the meter and in this manual
indicate cautions and warnings of important operational procedures that must
be followed to ensure personal and product safety.
This symbol indicates a General Warning. When adjacent to a termi-
nal or operating device indicates that the operator must refer to an
explanation in the Operating Instructions.
This symbol indicates that the terminal(s) so marked must not be con-
500V
MAX
nected to a circuit point at which the voltage with respect to ground
exceeds 500V AC/DC.
This symbol adjacent to one or more terminals indicates them as
being associated with ranges that may in normal use, be subjected
to particularly hazardous voltages. For maximum safety, the meter
and its test leads should not be handled when these terminals are
energized.
This meter is protected by double insulation. Service this meter by a
professional only.
INTRODUCTION
DMR-4200 is a manual ranging digital multimeter with a 2000 count
3-1/2 Digit LCD display. This meter can measure/test the following:
– Voltage
– Resistance
– Diode
– Temperature
LCD DISPLAY SYMBOLS
HAZARDOUS
VOLTAGE
DATA HOLD
LOW BATTERY
– Current
– Continuity
– Capacitance
– Frequency
INDICATES RANGE SELECTED
– 3 –
Advertisement
Table of Contents
