Parental Control; Lock System; Block Programme - Tevion T26WLZ53HID User Manual

Decoder Setting
You can set the Decoder Setting tab to On/Off by pressing the Right/Left
movement buttons. When it is set to ON, RF signal will be output from the SCART
output. This option must be set to ON when a Decoder is connected to SCART.
When this option is set to OFF, RF signal will not be output from the SCART
output. This option appears in the menu when the Signal Source is set to SCART.
It is not displayed in the menu in other options.

Parental Control

PARENTAL CONTROL

Lock System

Set PIN

Block Programme

Parental Guidance
Panel Lock
Select
Lock System
When the Lock System feature is set to On , a password is prompted if you want
to enter in the Auto Tuning, Digital Manual Tuning, Analogue Manual Tuning
submenus in the Channel Setup menu and the Program Table menu. These
menus are not accessible unless the correct password is entered.
Set PIN
You can change your Parental Control password from this menu as you wish. To
do this, select Set PIN tab and press OK button. Set PIN menu will be displayed.
Once you enter your new password two consecutive times, your password will
be changed.
Block Programme
With the Block Program feature, you can lock the desired channel and prevent
it from being viewed unless the correct password is entered. To do this, select
Block Programme tab from the Parental Control menu by pressing the UP/
Down movement buttons and confirm your selection with OK button. Block
Helpline No. UK/Northern Ireland 0845 850 4114 Rep. Ireland 0818 332 890
Web Support www.tevionservice.co.uk
Model Number: T26WLZ53HID
In the Parental Control menu, you can
preclude channels that are not appropriate
Off
for children and set age restriction for
programs being broadcasted. Password
Off
screen will be displayed when entering this
Off
menu. The menu will open only when the
correct password is entered. The default
password is set as 0000. You can change the
Back
password from the Set PIN menu as you wish.
Exit
31