Mini Clubman Owner's Manual page 183

The Mobility System with tire change set and
onboard vehicle tool kit is located under the
floor mat or the level load floor in the cargo bay.
1 Compressor
2 Valve removal tool
*
3
Wheel stud wrench
*
4 Vehicle jack
5
Torx insert bit for screwdriver
6 Flat screwdriver/Phillips screwdriver, towing
eyelet
7 Hub cover remover
8 Sealant bottle
Sealant and compressor
1 Sealant bottle and adhesive label with speed
limit
2 Filling hose
Note the use-by date on the sealant
bottle.<
Online Edition for Part no. 01 41 2 602 919 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 919 - © 08/09 BMW AG
3
Plug and cable for the socket in the vehicle
interior, page 92
4 Holder for the sealant bottle
5 Compressor
6 Pressure gauge for indicating the tire infla-
tion pressure
7 On/off switch
8
Release button for reducing the tire inflation
pressure
9
Connection hose to connect the compressor
and sealant bottle or the compressor and
wheel
Connector, cable and connection hose are
stored in the compressor housing.
Using the Mobility System
To repair a tire puncture with the Mobility Sys-
tem, proceed as follows:
> Fill the tire with sealant
>
Distribute the sealant
> Correct the tire inflation pressure
Filling the tire with sealant
Proceed in the specified order; otherwise,
sealant may emerge under high
pressure.<
1. Shake the sealant bottle.
2. Pull the connection hose 9 out of the com-
pressor housing fully and screw it onto the
connector of the sealant bottle. Make sure
that the hose is not kinked.
3. Insert the sealant bottle on the compressor
housing in an upright position.
181