Table of Contents
Advertisement
2. Specification
Model
Type
Dry weight
Blade size
Blade pitch
Transmission
Reduction ratio
Engine
Type
Model
Displacement
Max. output
Idle speed
Fuel
Carburetor
Spark plug
Fuel tank capacity
Specifications are subject to change without notice.
3. Warning labels on
the machine
(1)Read owner's manual before operat-
ing this machine.
(2)Wear head, eye and ear protection.
(3)Handling this machine improperly
could result in accidents causing se-
rious injury or death. Read this
manual carefully and practice using
the hedge-trimmer until you are fully
acquainted with all operations and
have learned to use it correctly.
(4)This is extremely sharp and can eas-
ily cause cuts.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Never modify your machine.
We won't warrant the machine, if you use the
remodeled hedge trimmer or if you don't ob-
serve the proper usage written in the manual.
HTZ7500
Reciprocating
single-sided dual blades
5.9 (kg)
750 (mm)
1.09Hp (0.8kW) at 8000 / min
mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
CHTZ6000
Reciprocating
double-sided dual blades
5.8 (kg)
600 (mm)
35 (mm)
Centrifugal clutch, Cam-crank
5.11
Air -cooled 2-stroke gasoline
Zenoah GZ23N
3
23.6 (cm
)
-1
3000±200 / min
(rpm)
Walbro Diaphragm type
NGK CMR7H
0.47 (litter)
4. Symbols on the
machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
HTZ7500 / CHTZ6000 / CHTZ7500
CHTZ7500
Reciprocating
double-sided dual blades
6,1 (kg)
750 (mm)
-1
(rpm)
G
B
GB-5
Advertisement
Table of Contents
