Specifications; Warning Labels On The Machine; Symbols On The Machine - Zenoah SRTZ2601F Owner's Manual

SRTZ2601F
2. Specification
Model
Overall size (LxWxH)
Dry weight *
Engine Type
Model
Max output
Idle speed
Displacement
Fuel
Carburetor
Spark plug
Fuel tank capacity
Transmission
Reduction ratio
Specifications are subject to change without notice.
* Shoulder strap and protective cover are not included.
3. Warning labels on
the machine
(1) Warning / Attention
(2) Read owner's manual before op-
erating this machine.
(3) Wear head, eye and ear protec-
tion.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Never modify your machine.
We won't warrant the machine, if you use the
remodeled trimmer or if you don't observe
the proper usage written in the manual.
GB-4
mm
kg
rpm
rpm
cm 3
Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
L
Centrifugal clutch, Spiral bevel gear, Cam crank
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the "MIX GASOLINE"
SRTZ2601F
1734 x 338 x 254
6.4
Air-cooled 2-stroke gasoline
Zenoah GZ25N
1.2Hp (0.9kW) at 7500min
-1
3000± 200min
25.4
Walbro Diaphragm type
NGK CMR7A
0.65
4.25
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER
-1