F
Changing the Picture Options
Advanced Settings
"
MENU3
Picture
ENTER
(Advanced Settings are available Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
✎
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
$GYDQFHG 6HWWLQJV
%ODFN 7RQH
'\QDPLF &RQWUDVW
6KDGRZ 'HWDLO
*DPPD
5*% 2QO\ 0RGH
&RORU 6SDFH
:KLWH %DODQFH
■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
■ Gamma: Adjust the primary color intensity.
■ RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
■ Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
■ White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Advanced Settings
2II
0HGLXP
2II
1DWLYH
& 0RYH ==(QWHU =$=5HWXUQ
■ Flesh Tone: Emphasize pink "Flesh Tone."
■ Edge Enhancement (Off / On): Emphasize object
boundaries.
Picture Options
"
MENU3
Picture
ENTER
✎
In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
3LFWXUH 2SWLRQV
&RORU 7RQH
6L]H
'LJLWDO 1RLVH )LOWHU
03(* 1RLVH )LOWHU
+'0, %ODFN /HYHO
)LOP 0RGH
$XWR 3URWHFWLRQ 7LPH
■ Color Tone (Cool / Normal / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
✎
Settings can be adjusted and stored for each external
device connected to an input on the TV.
■ Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
✎
Available for HD 1080i / 720p signal in 16:9 mode.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
Picture Options
1RUPDO
$XWR
$XWR
1RUPDO
2II
KRXUV
& 0RYH ==(QWHU =$=5HWXUQ
P.SIZE
English