Surface Units - GE PS920 Owner's Manual

Surface Units

WARNING
Throughout this manual, features and appearance may vary from your model.
Surface Unit Cook Settings
The cooktop offers 19 power levels. Power levels range
from "L" (Lo) to "H" (Hi) in precise half-step increments.
For example: L, 1, 1 ½, 2, 2 ½, and up to HI.
Power Level "L", the lowest setting, is recommended for
keeping food warm.
The power level increases one-half level with each touch.
NOTE: When changing from a high heat setting to a
lower heat setting, the surface unit may stop glowing.
This is normal. The unit is still on and hot.
To turn on a single surface unit:
1. Touch the On/Off pad; then touch the + or – pad.
2. Use the + or – pad to choose the desired power setting.
Multi-Ring Burner (can be dual or triple, depending on model)
1. Touch the On/Off pad for the right front surface unit
or the left front surface unit.
2. Use the + or – pad to choose the desired power setting.
3. Touch the Burner Size pad as needed to select the
desired burner size.
The light next to the Burner Size pad indicates which
size the surface unit is on. To turn the surface unit off,
touch the On/Off pad.
49-80694
FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high
settings. Keep flammable items away from the cooktop. Turn off all controls when done
cooking. Failure to follow these instructions can result in fire, serious injury or death.
NOTE: This cooktop has a rapid heat-up feature. If the
cooktop is cool when turned on, it will glow red for a short
period of time until the desired power setting is reached.
To use the Melt feature:
Touch the On/Off pad; then
touch Melt. The element
will automatically set to a
predetermined setting and
"L" will be displayed. To turn
off a single surface unit,
touch the On/Off pad again.
Or
The power level with a fraction
indicates the additional half-
step setting. You may hear
clicking sounds indicating the
control is maintaining your
desired setting.
9