Table of Contents
Advertisement
Call waiting on the cell line:
on the cordless handset or tap FLASH on the telephone base to put
•
Press
the current call on hold and take the new call.
on the cordless handset or tap FLASH on the telephone base at any
•
Press
time to switch back and forth between calls.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the telephone base/
handset ringer without disconnecting the call. The next call rings normally at the
preset volume.
•
To silence the handset ringer, press OFF or MUTE on the handset.
and Ringer muted displays briefly.
To silence the telephone base ringer, tap MUTE or VOL- on the telephone base.
•
displays and Ringer muted displays briefly.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call.
.
During a call, press
2.
Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you
end the call.
Find handset
Use this feature to find the system handset.
To start paging:
Press /FIND HANDSET at the bottom of the
•
telephone base. The idle handset rings and displays
Paging
To end paging:
Press /FIND HANDSET at the bottom of the telephone base.
•
-OR-
•
Press
,
,
-OR-
•
Place the cordless handset in the telephone base.
Do not press and hold /FIND HANDSET for more than four seconds. It may lead to
•
handset deregistration.
Redial list
Each handset stores the last 0 telephone numbers dialed. When there are already
0 entries, the oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list on the cordless handset:
Press REDIAL when the handset is not in use.
.
or REDIAL repeatedly until the desired entry displays.
2.
Press ,
,
3.
Press
To delete a redial entry on the cordless handset:
When the desired redial entry displays, press DELETE.
Join a call in progress
You can use the telephone base and the cordless handset, or two cordless
handsets at a time on a home line call. You can buy additional expansion handsets
(LS6001/LS6001-13/LS6001-15/LS6001-16/LS6001-17) for this telephone base.
You can register up to five handsets to the telephone base.
•
When a device is on a home line call, press
handset, or press
To exit the call, press OFF on the cordless handset or place it on the telephone
•
base, or press
hang up.
Transfer a call
While on an outside call, you can transfer the call from one handset to another
system device. You can only use the handset to transfer a call.
During a call, press MENU.
.
to scroll to Transfer, then press SELECT. When you have more
2.
Press
or
than one handset, use the dialing keys to enter a destination device number
(7 for the telephone base, or 1 to 5 for HANDSET 1 to HANDSET 5).
3.
To answer the call on the telephone base, press
-OR-
To answer the call on the cordless handset, press
on the handset or
.
, OFF or any dialing key on the cordless handset.
or
to dial.
on the telephone base to join the call.
on the telephone base. The call continues until all devices
on the telephone base.
or
on another cordless
,
,
7
displays
or any dialing key.
,
or any dialing key.
Advertisement
Table of Contents
