Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
An
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
1 While pushing the VOL control, press and
hold
(SEL).
MODE
SOURCE
DSPL , - (
0,)
VOL
SEEK/AMS
OFF
The following controls on the rotary commander
require a different operation from the unit.
•
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• SEL (select) button
The same as the select button on the unit.
PRESET/DISC control
CD: The same as
CD/®
(ALBUM -/+) on
the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEKIAMS control
The same as
(SEEK)
+/-
on the unit (rotate, or
rotate and hold).
• DSPL (display) button
To change display items.
20