Remove the Rear cover
7.2.3.
1. Remove the screws (24
2. Remove the M8 caps (4
3. Remove the Rear cover.
7.2.4.
Remove the Key button
1. Remove the screws (2
2. Remove the Key button.
, 6
, 2
).
).
).
7.2.5.
Remove the PSS-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the connectors (P2 and P35).
2. Disconnect the bridge connector (A6-P6).
3. Disconnect the flexible cables (SS53 and SS55A).
4. Remove the screws (5
the PSS-Board.
7.2.6.
Remove the A-Board
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the connectors (A1 and A12).
3. Disconnect the bridge connector (A6-P6).
4. Disconnect the flexible cables (A20 and A30).
5. Remove the screws (5
metal.
6. Remove the A-Board.
7. Remove the Attachment metal.
14
, 1
, 1
) and remove
) and remove the Side shield