7.2.7.
Remove the Speakers
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the Speaker terminal.
3. Remove the screws (2
Speakers (L, R).
7.2.8.
Remove the SN-Board
1. Remove the flexible cables (SN21, SN22, SN23, SN24,
SN25, SN26, SN27 and SN28) connected to the SN-
Board.
2. Disconnect the connector (SN2).
3. Disconnect the flexible cable (SN20).
4. Remove the screws (5
7.2.9.
Remove the Stand bracket
1. Remove the screws (5
Stand brackets (L, R).
each) and remove the
) and remove the SN-Board.
, 1
) and remove the
7.2.10. Remove the M8 nut metals
1. Remove the screw (1
metals.
7.2.11. Remove the K-Board
1. Remove the screw (1
2. Disconnect the connector (K1) and remove the K-Board
from the LED panel.
15
each) and remove the M8 nut
).