Inserting The Door Panels - GE CustomStyle Profile Performance 22 Owner's Manual

Inserting the door panels.

Remove the Top Trim on the Freezer Door
Using a T-20 Torx Driver, remove the two screws attaching the Top Trim.
Insert the Freezer Door Panel and Reinstall the Top Trim
Lower the freezer panel until it slides into the slot behind the door panel.
Push the filler panel (required with some door panels) in behind the
decorator panel.
Reinstall the Top Trim on the Freezer Door
Using a T-20 Torx Driver, reinstall the two screws attaching the Top Trim.
Tighten two screws to 30 in-lbs torque.
Insert the Fresh Food Panel
Carefully push the panel in until it slides into the slot behind the door
handle. Push the filler panel (required with some door panels) in behind
the decorator panel.
Top Trim
Screw Holes
Cut out
Freezer
Panel
Fresh Food
Panel
Cut out
Blue
Tape Liner
Side Trim
Freezer
Side Trim
Fresh Food
Blue
Tape Liner
17