Personal Safety; Hazards Arising From The Machine - Hammer K3 winner User Manual

Panel Saw
K3 basic/K3 winner
Safety

2.7 Personal safety

When working on or with the machine, the following
must be strictly observed:
Persons with long hair who are not wearing a hairnet are not permitted to work on or with the machine.
It is prohibited to wear gloves while working on or with the machine.
All jewellery (rings, bracelets, necklaces, etc.) must be removed before starting work on or with the ma-
chine.
When working on or with the machine, the following must always be worn by personnel:
Protective gear (overalls, safety goggles, dust mask, hairnet to contain long hair, etc.)
Sturdy, tight-fitting clothing (tear-resistant, no wide sleeves).
Protective footwear
That protects the feet from heavy falling objects and prevents sliding on slippery floors.
Ear protection
To protect against loss of hearing.

2.8 Hazards arising from the machine

The machine has undergone a hazards analysis. The
design and construction of the machine are based on the
results of this analysis and correspond to state-of-the-art
technology.
The machine is considered operationally safe when used
Warning! Danger – electric current: Electrical energy can cause serious bodily injury. Damaged insulation
materials or defective individual components can cause a life-threatening electrical shock.
• Before carrying out any maintenance, cleaning and
repair work, switch off the machine and secure it
against being accidentally switched on again.
• When carrying out any work on the electrical equip-
ment, ensure that the voltage supply is completely
isolated.
properly.
Nevertheless, there are some residual risks that must be
considered.
The machine runs with high electrical voltage.
• Do not remove any safety devices or alter them to put
them out of commission.
11