Table of Contents
Advertisement
Make sure your
computer is
connected to the
same network as
your LAN disk.
Do not connect
the USB and
Ethernet cables at
the same time!
To assure optimum
performance on the
network, only use
network switches
and routers.
If you buy a spare
power adapter,
make sure the
specifications are
identical with the
power adapter
supplied!
Chapter 3 - System Set Up
In LAN mode, the Pleiades is attached to an Ethernet switch or
router. Each user on the network can use the LAN disk and
access it using FTP or SMB.
In USB 2.0 High Speed mode, the Pleiades is directly attached
to a single computer via the USB port.
A few tips on how to connect your external storage enclosure:
• Do not cover the Enclosure and leave enough room around
it for the drive to cool down
• Do not expose the product to water or humid conditions
• Always check for visible damage and defects of power and
interface cables before use
• We recommend using the cables and adapter supplied with
your product
- 5 -
Advertisement
Table of Contents
