Trouble Shooting Sheet - LevelOne FCS-4000 User Manual

Trouble shooting sheet

Troubles
No action while power on.
No image.
The indicator isn't flashing.
Having image but can't
control.
The indicator isn't flashing.
Unstable images
Vague images
Restoring the factory defaults will erase any previous settings. Reset or restore the
system after power on.
Probable Reasons
Wrong power cable
connection.
The power adapter
broken.
Fuse broken.
Power cable is not in well
connection.
Firmware is hang up.
The camera ID address is
incorrect.
Protocol is incorrect.
Firmware is hang up.
Poor video cable
connection
Power W is not enough
The focus is on manual
operation.
The smoked cover is dirty. Clean up the cover
83
Solutions
Reverse.
Change.
Change.
Reconnected.
Start up with factory
default setting by pressing
the reset button over 5
seconds then releasing it.
Recheck the sip switch
Recheck the dip switch
Restart the IP Speed
dome by pressing and
releasing the reset button.
Reinsert
Change
Change into auto mode