Camera Installation - LevelOne FCS-4000 User Manual

Day/night p/t/z ip speed dome camera
Hide thumbs Also See for FCS-4000:
Table of Contents

Advertisement

Camera installation

Before installation, please set for the communication protocol, baud rate and
camera ID address first.
ID address setup
There are 8 dip-switchers on the PCB board. Please set it up as below:
All the dip-switchers are OFF.
*Remarks: Please reboot the camera after the camera setup is done.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fcs-4100Fcs-4200Fcs-4400Fcs-4500Fcs-4300

Table of Contents