Rinnai BC 70 2A Installation And User Manual page 17

OPERATION WITH DELUXE TEMPERATURE CONTROLLERS
Setting the Sound Volume
The sound volume for all Temperature Controllers can be set individually. Note that this can be done
with the Temperature Controllers switched off.
Press the 'Sound Vol.' Button located
behind the flip panel.
The volume will change as follows:
Initial Setting
Press Once
Press Again
Press Again
Using Hot Water
The hot water delivery temperature can be controlled from either the Kitchen Controller
(MC-70-2A) or the Bathroom Controller (BC-70-2A).
Deluxe Kitchen Controller
Ensure the system is switched on. When the system is
ON, the monitors will be lit. Confirm that the 'Transfer'
button is lit. If not, press the 'Transfer' button once.
Select the desired temperature using the 'Hot water temp.'
buttons. The selected temperature will be displayed on
both the Kitchen and Bathroom Controllers at the top of
each monitor.
Open the hot water tap. The hot water unit will activate
and the red combustion symbol will light on both the
kitchen and bathroom monitors.
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is
placed in contact with hot water.
CAUTION
Consumer safeguards: With the hot water tap open and a temperature of
43°C or higher selected, if the temperature is decreased to below 43ºC, and
then raised again the maximum available temperature will be 43°C, in
addition temperature 'priority' cannot be transferred between controllers.
NOTE
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.
Voice Volume
Medium
High
Off
Low
- 20 -
- 16 -
Transfer
Ho t wa ter
temp.
Cooler Hotter
M C -7 0 - 1 A
C
AM
Transfer
0 0 0 0
Hot water
temp.
Clock Hour Min.
Cooler
Sound
ON/OFF
Vol.
C
AM
Transfer
COLD
HOT
Hotter
MC -70 -1A
C
AM