Setting The Sound Volume; Using Hot Water - Rinnai BC 70 2A Installation And User Manual

DELUXE TEMPERATURE CONTROLLERS

Setting the Sound Volume

The 'Sound Vol.' Button located behind the flip panel is not used when one Kitchen Controller
is connected.

Using Hot Water

The hot water delivery temperature can be controlled
from the Kitchen Controller (MC-70-2A).
Ensure the system is switched ON. If not, press
the 'ON/OFF' button behind the flip panel once.
The 'Transfer' button will light up.
Select the desired temperature using the 'Hot
water temp.' buttons. The selected temperature
will be displayed on the controller monitor.
Open the hot water tap. The hot water unit will
activate and the red combustion symbol will light
up on the monitor.
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is placed in contact with hot water
CAUTION
Consumer safeguards: With the hot water tap open and a temperature of 43°C or higher selected, if the
temperature is decreased to below 43ºC, and then raised again the maximum available temperature
will be 43°C , in addition tem p erature ' p riorit y ' cannot be transferred between controllers.
NOTE
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.
C
AM
HOT COLD
- 18 -
- 14 -
Transfer
Hot water
temp.
Cooler Hotter
MC -70 -1A
Transfer
C
AM
.