Troubleshooting; Specifications; Psm General Settings - JVC KD-R200 Instructions & Installation Manual

This sometimes O((urs during playback. This is caused by how the
tracks are recorded on the disc.
This unit can only display alphabets (upper casel. numbers, and a
limited number ofsymbols.
Resetthe unit.
insert the disc correctiy.
Connect the antenna firmly.
Store stations manually.
• Insert afinalized CD-R/CD-RW.
• Finalize the CD-RlCD-RW with the component which you used
for recording.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cordsand connections.
• The correct characters are not displayed
(e.g. album name).
• Alonger readout time is required Do not use too many hierarchical levels and folders.
("READING" keeps flashing on the display).
• The elapsed playing time is not correct.
• Tracks are not played back in the order you Playback order is determined when the files are recorded.
have Intended.
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display. Insert a playable disc into the loading slot.
• "PLEASE" and "EJECT" appear alternately
on the display.
• Noise is generated. Skip to another track or change the disc. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 orWMA tracks.)
• Disc ejects.
• Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded In aformat compliant
with 1509660 Levell, Levell, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the file names.
• CD-RlCD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Static noise whiie listening to the radio.
• This unit does not work at ali.
• SSM automatic presetting does not work.
Symptoms
t .
Discean be neither played back nor ejected. • Unlock the disc.
-a .
Eject the discforcibly.
il:
;S
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
S
i; . The buttons on the unit do not work as you If you press MMODE, some buttons work differently from it
... intended. original function. Wait for 5seconds or press MMODE again.
Ent.r PSM m.nu. Sel.ctanit....
Adjust.
,
Finish
OR
•
e
•
(@}uml
•
C!EJ
IHold]
c9
Indication
It.m (_: Initial) Setting
DEMO
• DEMO ON
Display demonstration will be activated automatically if no operation is done
for about 10 seconds.
• DEMO OFF Cancels.
ClK DISp"
• ON
: Clock time is shown on the display at all times when the power is turned off.
• OFF
: Cancels; pressing DlSP will show the clock time for about 5seconds when the
power is turned off.
ClOCK H(Hour) 1-12 [initial: 1(1:00)1
CLOCK M(Minute) 00-59 [Initial: 00 (1 :00))
DIMMER
• ON
Dims the display and button illumination.
• OFF Cancels.
SCROLL"
• ONCE
Scrolls the displayed information once.
• AUTO
Repeats scrolling (at 5-second intervals).
• OFF
Cancels.
• Pressing DlSP for more than one second can scroll the display regardless of
the setting.
UOMODE
• REAR
Select if the REAR LINE OUT terminals are used for connecting the speakers
(through an external amplifier).
• WOOFER
Select ilthe REAR LINE OUT terminals are used for connecting a subwoofer.
WOOFER"
• LOW
Frequencies lower than 90 Hz are sentto the subwoofer.
• MID :
Frequencies lower than 135 Hzare sentto the subwoofer.
• HIGH
Frequencies lower than 180 Hzare sentto the subwoofer.
AUXADI A.ADIOO Adjust the auxiliary input level to avoid the sudden increase of the output
-A.ADI05 level when changing the source from external component connected to the
AUX input jack on the control panel.
TAGDISP
• TAGON
Shows the Tag while playing MP3/WMA tracks.
• TAG OFF
Cancels.
AMP GAIN*'
• LOWPWR
VOL 00 - VOL 30 (Select ilthe maximum power ofeach speaker is less than
50 Wto prevent damaging the speaker.)
• HIGHPWR
VOL 00 - VOL 50
AREA • AREAUS When using in North/Central/South America. AM/FM intervals are set to
10 kHz/l00 kHz.
• AREA EU : When using in any other areas. AMlFM intervals are set to 9kHz/SO kHz
(100 kHz during auto search).
• AREASA When using in South American countries where FM interval is 100khz.
AM interval issetto 10khz.
• General settings-PSM
*'
/f the power supply is not interrupted by turning offthe ignition key ofyour cor, it is recommended thatyou select "OFF" to
sove the cor's battery.
*'
Some characters orsymbols will not be shown correctly (or will be blanked) on the display.
• , Displayed only when "UD MODE" is set to "WOOFER. "
*' The volume level automatically changes to "VOL 30"ifyou change to "LOW PWR" while the volume level is set higher than
"VDLJO:
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
SPECIFICATIONS
Load Impedance:
Tone Control Range:
Number of channels:
Frequency Response:
Dynamic Range:
Signal-to-Noise Ratio:
Wow and Flutter:
MP3 Decoding Format:
• Audio amplifier section
Power Output:
10 WRMS.x 4Channels at 40 and
,;; 1% THD+N
Signal-to-Noise Ratio:
80 d8A (reference: 1Winto 40)
40 (40 to 80 allowance)
Bass: ±11 dB at 60 Hz
Mid-range: ±11dBatl kHz
Treble: ±11 dBat 7.5 kHz
Frequency Response: 40 Hz to 10000 Hz
Line-Out Level/Impedance: 2.5 V/l0 kO load (full scale)
Output impedance:
1
kO
Subwoofer-Out Level/Impedance:
1.5 V/20 kO load (full scale)
If a kit is necessary for your car, consult your telephone
directory for the nearest car audio speciality shop.
• Tuner section
Frequency Range:
FM: 87.5MHztol07.9MHz
(with channel interval set to 100 kHz or 100 kHz)
87.5MHztol08.0MHz '
(With channel interval set to 50 kHz)
AM: 530 kHz to 1710 kHz
(with channel intervai setto 10 kHz)
531 kHz to 1601 kHz
(with channel interval set to 9kHz)
[FMTun.rJ
Usable Sensitivity: 11.3 dBf (1.0 pV/7S 0)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 pVI7S 0)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
[AMlunerl
Sensitivity/Selectivity: 10 pV/3S dB
• CD player section
Type: Compact disc player
Signal Detection System: Non-contact optical pickup
(semiconductor laser)
1channels (stereo)
5Hz to 10 000 Hz
93 dB
98dB
Less than measurable limit
MPEGI/l Audio Layer 3
Max. Bit Rate: 310 kbps
WMA (Windows Media' Audio) Decoding Format:
Max. Bit Rate: 191 kbps
Having TROUBLE with operation?
Please reset your unit
Still having trouble??
Call 1·800·252·5722 (USA ONLY)
http://WWw.jvc.com
• General
Power Requirement: Operating Voltage: DC 14.4 V
(11
Vto 16 Vallowance)
Grounding System: Negative ground
Allowable Operating Temperature:
. O'C to +40'C (31'F to 104'F)
Dimensions (W x Hx D):
Installation Size (approx.):
181 mm x 51 mm x 160 mm
(7-3/16" x 1-1/16" x 6-5/16")
Panel Size (approx.):
188 mmx 58mm x 5mm
(7-7/16" x 1-5/16" x 1/4")
Mass (approx.):
1.3 kg (1.9Ibs) (excluding accessories)
Design and specifications are subject
to
change without
notice.
TROUBLESHOOTING
3-EN
WARNINGS
Prepare this
before
jnstallation
This'unn
~ designed
to operate on 12 V
DC,
NE6AllVEground oIedrklIl To prevent short circuits, were<ommend thatyou disconnect the battery's .....
syst...s.1fyourvehide does not have
th~
system, a voltag. inverter is required..
~
terminal and make all electrical cO/lnections before installing the unil.
which can
be
purdlased allVe car audio dealers.
. . . • Bt5lll'1!toground
tII~
unit
to
tIM
car's diassIs again
after~.
~
• Replace the fuse with one ofthe specified (ating.lfthe fuse blows frequently,
consu~ your IVC car audio dealer.
• It is re<ommended1~ connect to t!ll'\peakers with maximum po~ of more
than 50 W(both at the rear and atthefrpnt, with an impedaoce of40 to
80).
If
themaximtim
power
is
less than 50 W, change "AMP GAIN' setting to
prevent
the speake15 flom being da~ (see "General settings-'--PSM1.·
• To prevent short-circui!, coverthe terminals
~
·~~jri-;~i,~
Heat sink
PREPARATION