Application The ASCENDO Loudspeaker C8 Renaissance intended for use in small to mid-size rooms (< 100 m³ You can use the C8 Renaissance with amplifiers in the power range of 10 W to 350 W. Safety Warning Warning This Loudspeaker can produce high sound-levels. This may damage your ears permanently!
Operating modes You can use the C8 Renaissance a single-amp setup (one power amplifier for high- and low- frequency unit) or in a bi-amp setup (one power amplifier for the low-frequency-unit, one for the high-frequency unit). If your setup is single-amp you must bridge the high- and low-frequency unit with a high quality speaker cable.
There may be a slight permanent imprint in soft floor-material. Mounting WARNING Don’t try to mount the System C8 Renaissance alone. The weight is too much for a single person. You need at least two persons to build up the system. Place the base(3) carefully at the desired place.
Transport Warning Don’t try to move the C8 Renaissance alone. The weight is too much for a single person. You need at least two persons to build up the system. Switch off the power amplifiers and disconnect all cables of the C8 Renaissance.
Switch (8) in position AUS (Hemisphere) • One-Point-Source with homogenous hemisphere diversity Cleaning Clean the enclosure and stand of the ASCENDO C8 RENAISSANCE with a dry and soft cloth. Don’t use water or other chemicals. Don’t touch the tweeter and the woofer.
Need help?
Do you have a question about the C8 Renaissance and is the answer not in the manual?
Questions and answers