BYD G3 AUTO Owner's Manual page 67

Playing Compact Disc
To play compact disc, the ignition
switch must be turned
ACCESSORY (I) or ON (II).You can
operate CD player with
controlling device which can also be
used to operate the radio. To select
CD player, please press DISC button.
You will see "CD" and the number of
ongoing program displayed on the
screen. System will continue to play
CD until you change the mode.
Insert a CD into the CD slot and the
driver will absorb it and start playing.
After the system finishes playing, it
will return to the very beginning and
play the CD again.
Notes：
Please do not use the disk with any
adhesive label. As the label may curl,
it may lead to the disc to be locked in
the device or cause other faults.
Please do not play the 8cm (3 inch)
disc. You are only allowed to play the
standard round disc. Deformed disc
may be locked in the driver or cause
other faults.
To achieve the best effect for playing
CD-R, please only use the high-quality
to
disc with the mark of "
CD-R shall be completely closed. By
the
doing so, the disc can be played on the
CD player. This device is not designed
for CD-RW.
When playing the CD, press FM/AM
button and you can switch to radio mode.
Press DISC button again and the
system returns to CD mode and starts
playing from the point where it stops last
time.
During playing, if you turn off this system
by pressing PWR/VOL button or shutting
down the ignition switch, the disc will
remain in the driver. Start this system
again and the player will start playing
from the point where it stops last time.
Press Exit button and you can take out
the disc from the driver.
If the disc is released out but not taken
away from the disc slot for ten seconds,
it will enter again automatically.
start playing this disc, just press DISC
button.
During playing the disc, you can select
music and change program by SEEK
button.
To fast move the disc in the same
program, just long press SEEK button.
Long press the top of "SEEK" button to
".Making a
fast forward and its bottom to fast rewind.
When it reaches your desired position,
just release the button. Short press the
top of "SEEK" button, the system will
skip forward to the beginning of next
program. Shot press the bottom of
"SEEK" button, the system will skip
backward to the beginning of current
program.
Press it again and the system will skip to
the beginning of last program. During
playing, you can achieve such functions
as pause, repeat (RPT), preview (INT)
or random play (RDM).
Pause
In CD mode, press 1 to pause. Play-time
of the current track will flicker on the
screen for reminding. Press 1 again and
it can get back to normal playing.
Repeat (RPT)
To enable this function, just press 2 in
To
CD mode. "RPT" will appear on the
screen for reminding. The system will
replay the current program continuously.
Press 2 again and you can disable this
function.
BYD G3 AUTO Owner's Manual
61