Tachometer - BYD G3 AUTO Owner's Manual

Odometer and Dual Short Mileage
Odometer
This screen displays the following
information.
1. Odometer – displays the total travel
mileage of the car.
2. Dual Short Mileage Odometer –
display the travel mileage after the two
short mileage odometers are reset to
zero respectively.
You can use one to calculate remaining
fuel amount (TRIP A) and use another to
record the mileage of each trip (TRIPB).
3. Trip/Reset button (ODO TRIP button
on the left) – reset the dual short
mileage odometers and change the
display mode.
To change the display mode, press
down and then quickly release the ODO
TRIP button. Pressing
repeatedly, the odometer will display the
following information in cycle:
Mileage (ODO) – Short
Odometer (TRIPA) – Short Mileage
Odometer (TRIP B) - Total Mileage
(ODO).
To reset a short mileage odometer,
switch the information displayed on the
screen to the reading of it firstly, then
press TRIP button for over 2 seconds
and release the button after it is reset to
zero.
BYD G3 AUTO Owner's Manual

Tachometer

Tachometer
speed in rpm (round per minute) by
multiply the reading by 1000. Make
gear shifting
tachometer
the button
engine from over speed running.
Total
Driving at over high engine speed will
Mileage
lead to excessive wear of the engine
and higher fuel consumption.
Do not allow the pointer to enter
read area, which means the
engine may severely damaged.
displays the engine
according to the
reading can prevent
Note
47