BYD G3 AUTO Owner's Manual page 113

Before installation, please brush off all
corrosive materials on the installation
surface with a wire brush. During
installation, the metal area on the
installation surfaces must be in well
contact with each other, or the wheel
bolts may get loose, which may cause
the tire falling off in driving.
Reinstall Wheel Bolts
7. Reinstall all wheel bolts manually.
To reinstall bolts, please manually
tighten them with wedged end inward
first. Push the wheel backward and try to
further tighten the bolts manually.
Tips
Do not apply engine oil or
lubricant on the bolts, or they will
get loose, which may cause the
wheel detached and
serious accident. 。 If there is
engine oil or lubricant on the
bolts or nuts, clean
immediately.
BYD G3 AUTO Owner's Manual
Lower Down Vehicle
8. Lower down the car to ground and
tighten the wheel bolts.
To lay down the car, please rotate the
jack handle counterclockwise.
Please use a spanner for wheel bolt to
tighten the bolts. Do not use any other
tools or lever, like hammer, tube, or your
feet.
Make sure the spanner is fitted onto the
bolts firmly.
As per the order shown in the figure
lead to
above, tighten the bolts slightly one by
one, repeat the procedure until all the
bolts are fastened firmly.
them
107