System Specifications - SpectraPure MaxPure MPDI RO System Installation And Operating Manual

SpectraPure

SYSTEM SPECIFICATIONS:

Sediment Pre-Filter
Carbon Filter
RO Membrane Type
DI Cartridge
Rejection Rate
Input Water Pressure
Input Water Temp
Recovery Rate
Nominal Membrane Flow Rates @ 60 psi & 77° F :
GPD (lpd) Product
25 (95)
40 (151)
60 (228)
90 (340)
180 (680)
Reverse Osmosis Membrane Feed Water
For the 1 year SpectraSelect TFC membrane pro-rated warranty to be honored, the
following conditions must be met:
Operating Pressure*
pH Range
Maximum Temperature
Maximum Turbidity
Maximum Silt Density Index
Maximum Chlorine
Maximum TDS
Maximum Hardness
Maximum Iron
Maximum Manganese
Maximum Hydrogen Sulfide
Langlier Saturation Index
*Operating pressure less than 40 psi will require a booster pump:
less than 49 GPD use BPLF-MO-115(-230),
more than 49 GPD use BPHF-MO-115(-230).
*Operating pressure greater than 80 psi will require a pressure reducing valve.
SpectraPure®Inc.
2167 East Fifth St, Tempe, Arizona 85281
4
®
0.5 micron MicroTec™ sediment pre-filter
0.5 micron carbon block pre-filter
SpectraPure Thin-Film Composite (TFC)
Color Indicating SilicaBuster™
Greater than 96% average
60 psi (4.15 bar) line pressure*
77°F (25°C)
20% (i.e. 20% of the water will be collected as pure water)
Water Flow Rate
66 ml/min
105ml/min
158 ml/min
235ml/min
470ml/min
Requirements
40 – 80 psi (2.75 – 5.5 bar)
3 – 11
100° F (38° C)
1.0 NTU
5.0 (based on 15 min. test time)
less than 0.1 ppm
2000 ppm
10 grains (170 ppm as CaCO3)
less than 0.1 ppm
less than 0.1 ppm
0 ppm
LSI must be negative
480.894.5437 Call us toll-free 1.800.685.2783
Concentrate Flow Rate
264 ml/min
420 ml/min
632 ml/min
940 ml/min
1880 ml/min