Do you have a question about the PH-5-3F and is the answer not in the manual?
Questions and answers
Phil Jones
April 26, 2025
Is there anyone in the Milton Keynes' area who can dismantle and repair a Paloma PH-5-3F that has sprung a leak -- I think, a leak at its top?
1 comments:
Mr. Anderson
May 14, 2025
In the context, it is suggested that a gas engineer was able to remove and refit a Paloma PH-5-3F when the mounting screws were difficult to access. Therefore, you can contact a qualified gas engineer in the Milton Keynes area to dismantle and repair the unit.
This answer is automatically generated
John O'Shea
April 23, 2025
how do i remove the front cover on the ph5 water heater
1 comments:
Mr. Anderson
May 12, 2025
To remove the front cover on the Paloma PH-5-3F water heater:
1. Pull off the two control knobs. 2. Remove the two knurled plastic-headed screws, one on each side. 3. Lift and pull the cover to remove it.
This will expose the mounting screws and internal connections.
Need help?
Do you have a question about the PH-5-3F and is the answer not in the manual?
Questions and answers
Is there anyone in the Milton Keynes' area who can dismantle and repair a Paloma PH-5-3F that has sprung a leak -- I think, a leak at its top?
In the context, it is suggested that a gas engineer was able to remove and refit a Paloma PH-5-3F when the mounting screws were difficult to access. Therefore, you can contact a qualified gas engineer in the Milton Keynes area to dismantle and repair the unit.
This answer is automatically generated
how do i remove the front cover on the ph5 water heater
To remove the front cover on the Paloma PH-5-3F water heater:
1. Pull off the two control knobs.
2. Remove the two knurled plastic-headed screws, one on each side.
3. Lift and pull the cover to remove it.
This will expose the mounting screws and internal connections.
This answer is automatically generated
what are the clearances around the heater