iHome IB9 User Manual

Model: iB9
Stereo Ear Hook Style
Headphones with
In-line Volume Control
Using Your iHome Ear Hook Style Headphones
The earpieces are marked "L" and "R". Place
the "L" earpiece in your left ear and the "R"
earpiece in your right ear for proper fit and
best sound. If the earpieces are inserted
incorrectly they will not fit properly in your
ears and the sound quality will not be
satisfactory. Place the ear hooks over your
ears as shown. The ear hooks have two
adjustment points for maximum comfort.
Connect the headphone plug to the headphone jack of your music
player. Be sure that the plug is fully inserted into the jack. If the plug
is not fully inserted you may only hear sound from one earpiece.
To protect your hearing, always start listening with the In-Line
Volume Control set to a low level and gradually increase the volume
to a comfortable listening level.
Note: You may have to adjust the volume control on your music
player as well as the In-Line Volume Control on your headphones to
find the most satisfactory sound level. If one control is set too low
and the other is set too high, the sound may be distorted. Try setting
the volume control on your music player halfway between the Min
and Max settings, and then use the In-Line Volume Control on your
iHome headphones to make final adjustments.
IMPORTANT! Listening at high volume for long periods of time can
result in long-term hearing damage. For your safety, do not use
headphones if they would prevent you from hearing warning
sounds, such as while driving a car or motorcycle, riding a bike, etc.
NOTE: In extremely cold or dry air conditions you may notice a slight
'tingling' feeling in your ears when using in-ear headphones. This is
the result of the build-up of static electricity in your body. This is
normal and not an indication of any problem with your headphones.