Lowering Dim Level; Raising Dim Level - LightwaveRF JSJS LW100 Operation Manual

2) Linked to a 'Dimmer' receiver (e.g. Room Control
Single Dimmer or dimmable CFR):

Lowering Dim Level

1. Make sure the light is switched on.
2. Hold down the 'OFF' button.
3. After 1 second the light will start to dim.
4. At the desired brightness level release the 'OFF'
button.
NOTE: If the 'OFF' button is not released, the light will
continue to dim until it reaches its lowest possible
level (without being turned o ) and stop.

Raising Dim Level

1. Make sure the light is switched on.
2. Hold down the 'ON' button.