Download Print this page

LightwaveRF JSJS LW105 Operation Manual

5 button remote

LightwaveRF

connect

5 Button Remote

Operation Manual

Model No: JSJS LW105

It is important to install this product in accordance

with the tting instructions below. Failure to do so

may render your guarantee void.

IMPORTANT: PLEASE RETAIN THESE INSTRUCTIONS

FOR FUTURE REFERENCE AND FOR GUIDANCE ON

THE ASSOCIATION OF REMOTE HANDSETS. FOR

HELP AND SETUP GUIDANCE PLEASE VISIT

www.lightwaverf.com

OVERVIEW:

Table of Contents

Do you have a question about the JSJS LW105 and is the answer not in the manual?

Page 1: Operation Manual
LightwaveRF connect 5 Button Remote Operation Manual Model No: JSJS LW105 It is important to install this product in accordance with the tting instructions below. Failure to do so may render your guarantee void. IMPORTANT: PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE AND FOR GUIDANCE ON THE ASSOCIATION OF REMOTE HANDSETS.
Page 2 The LightwaveRF Connect 5 Button Remote is designed to control LightwaveRF Connect CFR remote control bulbs or any other remotely controllable products in the range. SETUP: The functions illustrated here relate to the operation of a dimmable CFR. For information regarding how to pair the remote to the relevant receiver/s please refer to the setup instructions for that individual device.
Page 3 • Press the ‘ON’ button once to switch paired devices on. • Press the ‘OFF’ button once to switch paired devices o . • Press the ‘ALL OFF’ button once to switch o all paired bulbs. Dimming down 1. Make sure the light is switched 2.
Page 4 Battery Replacement Slide down the back cover and use a small screwdriver to remove the battery. • Connect correctly and secure • Do not recharge • Keep away from children • Do not swallow (If swallowed, seek medical advice immediately) •...