Subscribe to Our Youtube Channel
Related Manuals for ParaBody 870
Summary of Contents for ParaBody 870
- Page 1 870 VERTICAL DUMBBELL RACK CLASS H PART # 7081401 REV. A USER’S GUIDE WARNING: Read and follow all directions for each step to insure proper assembly of this product. Version: 870107 Revision: 03/26/01...
- Page 2 7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician. 8. Make sure all spring loaded pull pins are fully engaged in the adjustment position and fully tighten thumbscrew before use.
-
Page 3: Tools Required For Assembly
Please note: * Thank you for purchasing the ParaBody 870 DUMBBELL RACK. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. -
Page 4: Parts List
PART # DESCRIPTION 6215708 FOOT BRACE ASSY 6284702 ADJUSTABLE TUBE ASSY 6013708 CONNECTOR PLATE 3102942 3/8 X 3-1/2” BOLT 3102501 3/8” FLAT WASHER 3102802 3/8” LOCK NUT FIGURE 5 STEP 5: • Remove the hardware from the FRONT LEG of BENCH assembly •...
Need help?
Do you have a question about the 870 and is the answer not in the manual?
Questions and answers