Get Started; Connect Power - Philips DS3120 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Connect power

Caution
‡
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
‡
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Note
‡
The type plate is located at the back of the unit.
Connect the AC power adaptor to:
‡ the power socket at the back of the
docking speaker.
‡ the wall socket.
5 EN
Built-in Battery
Caution
‡
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The docking speaker can also operate on the
built-in rechargeable battery.
Battery power LED indicator
Low Flashing
Full Steadily on
Empty Off
To recharge the built-in battery:
‡ Connect the docking speaker to the power
supply.
» In standby mode, the LED indicators
are off.
Note
‡
Use the supplied AC adapter only to charge the
battery.